- 2 screws on the back, and
- 1 screw inside the printer (lid pinternya)
1. Open the side cover (see picture)
2. Remove the encoder and timming belt (see picture)
3. Separated by mechanical behind (see picture)
4. Remove the mechanical buttons on the left and right (see picture)
5. U.S. freelance Gear iron but try not to matter (see picture)
6. Clean sensor of luberan ink (see picture).
7. Check whether there is a path sensor broken or damaged wires.
8. Check the connections from the sensor socket
Disassemble this printer requires creativity and perseverance during the process,
If you are afraid to forget how meraklitnya again, before dismantling the Epson R210 / R230, you can take pictures with your camera first partially.
