Head: serves to regulate the discharge of ink.
Catrdige: bin serves as a container of ink that will flow to the head.
In this case, Canon and HP printers are often mengabungkan both the head and cartridge into one section. While Epson is often split between the head and Cartridge.
How it Works Head Catridge :
When the printer is commanded to ngeprint, it will be processed by the board last printer and printer board will send commands to the head to perform printing. Head will set the heater filament abyssal to set the ink which one should be issued for a drawing / writing. So the way it works is by heating the ink, so the ink becomes thin and easy to spray out through the track a very small hole (nozzle). Excessive heating will make catrid who heat up quickly, so in this case the printer ink that acts as a coolant as well. so this function as well as ink if dikendaraan motor oil and is very important, so do not be left blank until the cartridge is too long.
Supererogatory head heating is caused by:
1. printed in large quantities and there is no pause / rest, or
2. Printer ink runs out and is still used for ngeprint,
That's why Canon or HP Color catrdige often very damaging, because:
1. Color who rarely used, so that the nozzle clogged because the ink is dry, and the result would be an overheating due to no cooling of the ink, since ink jams.
2. Color ink runs out and not in the content, there will be overheating of the head and consequently the chip in the head will burn.
Tips For Printer Cartridge Long-lasting and Durable:
1. Do ngeprint in large quantities directly, but you break every 10 sheets, kira2x 2-5 minutes, especially if ngeprint photo quality, you rest more.
2. Do not let the ink runs out too long, even better before it runs out of ink filled in first.
3. Do not squelch the printer (not used ngeprint) more than 5 to 7 days. So each week who must be at least once ngeprint black and color (use to ngeprint photos)
4. Do not often mutually brand ink, karen keenceran each different ink brands and is very influential on the printer head.
5. For Infusion printer, make sure the ink flows smoothly into the cartridge, do not get clogged.
6. Do not fill too full because the ink will cause the ink will not leak out even head is too heavy due to the pressure of the ink, if this happens again then suck ink refill kit with the existing
