1. At the time the printer is turned on, the printer will flame with a normal canon with the indicator lights glow green power is full.
2. then when we try to ngeprint, then appears this problem, namely:
# Canon pixma IP ... : Blink character with orange lights blinking - blinking
# Printer Canon MP .... : Character out error E15 or E16
3. This issue is in the show with a warning look that said thus: "The following ink may have run out."
# The following ink may have run out Black: The black cartridge is necessary on a resume / reset
# The following ink may have run out Colour: means the color cartridges need to be on a resume / reset
A warning message Printer Canon IP and MP Blinking After Refill like the one in the picture below.
How to Cope After Refill Canon Printer Blinking is:
1. For Canon Pixma IP1200 type, 1300, 1600, 1700, 1880, 1980: after the printer is blinking, press the resume button between 10-30 seconds then release. If the picture above is lost means the way it works, but if it appears again means you have to press the RESUME button again like the above. This occurs when both the refill cartridge. so need a reset for the black and color cartridges.
2. For Canon MP145 type, MP160, MP150, MP and other
==> Press the STOP / RESET about 30 seconds until the LED panel rotating flame.
This applies to the runout catrid catrid black or color.
