Screwdrivers plus (+) and minus screwdriver (-)
Chimney / funnel size
Tang pointed little face
Toner powder size 100 gr
HOW TO WORK
1. Remove the cartridge from the printer, and then note the position of the drum. DO not ever hold the drum cartridge, this can cause the drum will be damaged.
This is the position of an HP cartridge that will refill
2. Remove all existing bolts on the right side position of the cartridge by using a screwdriver plus (+)
3. After the bolts removed, open the lid cover the filling tube cartridge
4. Place filling toner powder
5. Open the cover of the toner filling tube using a screwdriver minus (-) slowly
6. Lift the cover of the toner filling tube using pliers taper gradually
7. Once removed, set up the tube to enter the toner powder
8. Place the chimney / funnel into the hole toner, toner powder and then pour the toner into the drum slowly
9. When finished, close the cover and put back all also all the bolts removed earlier. Do not forget to clean the toner cartridge of powder
