1. Open the back cover, by opening two nuts / screws.
2. There are two boards, which one is the Module Power Suply and the other Boards who green color printer.
3. Find a small IC 93C66 eeprom ft 8 in Green Printer Board.
4. Connect PIN 1 and 4 at the foot of a small IC 93C66 with tiny wires soldered reply
5. Then make sure all the cables attached back, and turn on the printer Samsung ML-1640, ML-1641, ML-1645. (do not forget to plug the power cord)
6. Wait a few moments until the printer Samsung ML-1640, ML-1641, ML-1645 is completed calibration and green lights flashing.
7. After the lights flashing green, turn off the printer.
8. Remove the small wire connecting pins 1 and 4 IC 93C66.
9. Close the printer Samsung ML-1640, ML-1641, ML-1645, do not forget to attach the screw.
10. Printer Samsung ML-1640, ML-1641, ML-1645 is ready for use again.
Resetter way this could be used for the Samsung ML-1640, ML-1641, ML-1645.
How to Reset Samsung ML-2240
