How to Reset Samsung ML-2240

Printer Samsung ML-2240 is an economical laser printer. However, this printer will stop working after ngeprint 2100 pages. Blink red jamming the printer will continue and asked for change toner. But there are ways to reset it, want to know how to ....?

How to Reset Samsung ML-2240
1. Open the back cover, by opening two nuts / screws.

2. There are two boards, which one is the Power Supply Module and the other Boards who green color printer.Reset Samsung ML-1640, ML-1641, ML-1645
3. Find a small IC 93C66 eeprom ft 8 in Green Printer Board.

4. Connect PIN 1 and 4 at the foot of a small IC 93C66 with tiny wires soldered reply.

How to Reset Samsung ML-1640, ML-1641, ML-1645
5. Then make sure all the cables attached back, and turn on the printer Samsung ML-2240. (do not forget to plug the power cord)

6. Wait a few moments until the Samsung ML-2240 printer calibration is finished and the lights glow green.

7. After the lights flashing green, turn off the printer.

8. Remove the small wire connecting pins 1 and 4 IC 93C66.

9. Close the printer Samsung ML-2240, do not forget to attach the screw.

10. Samsung ML-2240 printer is ready for use again.

Resetter way this could be used for the Samsung ML-2240.